Blue Streak Coil Ignition and Modulefor Saturn Vue

Blue Streak Ignition Coils

Heavier-Duty Ignition Coils

Product of Superior Design

Blue Streak's new heavier-duty ignition coils are the product of superior design, manufacturing, and testing. For example, take our UF303, one of the many new heavier-duty ignition coils in our line.

View our Blue Streak Just the Facts: Heavier-Duty Ignition Coil Flyer

• 

  Advanced thermoplastic coil connector ensures proper connection and resists fractures caused by heat and thermal cycling

• 

  Primary (23 gauge) and Secondary (43 gauge) copper wire ensure high-voltage availability for peak performance while reinforced bobbins prevent voltage flashover for extended service life

• 

  High-impact housing material ensures superior bond to epoxy for longer life in all operating conditions

• 

  Internal, neodymium permanent magnet core surrounded by grain-oriented, magnetic-laminated steel maximizes high-voltage output at all engine RPMs and loads

• 

  Tested at extreme engine performance condition at 7200 RPM

• 

  Engineered and tested to match or exceed OE for spark energy output, impedance, and durability

• 

  High-temp boot prevents high-voltage leaks, while stainless-steel spring with internal ferrite noise suppressor prevents radio frequency interference (RFI)

• 

  Isolator manufactured using high voltage-resistant thermoplastics to prevent premature coil failure

• 

  Copper wires using higher insulation grade ensure heat resistance and prevent high voltage breakdown

• 

  Optimum wire distribution developed by extensive testing ensures superior functional parameters and durability

Blue Streak vs OE Coil Comparison

To see what makes our Blue Streak^® coils superior, we conducted a visual cutaway comparison against the OE. Here's what we found:

• 

  OE: 8 primary winding sections.

  Blue Streak: With 10 primary winding sections, our design reduces the height of each section's winding to decrease the risk of breakage between sections.

• 

  OE: Uneven number of winding turns.

  Blue Streak: Our barrel winding distribution precisely reduces the number of turns in the first and last two sections to reduce the voltage gradient. When combined with our higher G2 insulation grade, our winding distribution lowers the risk of breakage within the winding.

• 

  OE: Potted using "yellow" epoxy system.

  Blue Streak: When compared to common "amber/yellow" epoxy systems, our "black" epoxy system features nearly 40% higher insulation resistance to voltage breakdown.

Blue Streak Outperforms the OE

All products manufactured at our IATF 16949 and ISO 9001-certified facility in Poland undergo extensive measurement and life testing, in addition to a full range of environmental analysis that includes thermal shocks, thermal cycling, and vibration tests, just to name a few. To see what goes into our coil testing, take a look at this competitor comparison between our UF303 and the OE:

OE Comparison Analysis

Testing Takeaways

• The two OE coils tested short circuited after 68 hours and 140 hours, respectively
• The two Blue Streak^® coils tested passed the 300-hour life test as well as 100 thermal cycles, a 24-hour life test, and 10 thermal shocks
• Compared to the OE, Blue Streak ^® coils have 9% higher spark energy and 18% higher secondary voltage, which leads to better combustion of fuel mixture and reduced exhaust gas discharge

"As testing shows, we've designed our Blue Streak Ignition Coils for superior performance and durability under the harshest conditions."

Tomasz Michalik

Technical Director - SMP Bialystok, Poland

Basic Manufacturing at Our State-of-the-Art Facility

Our IATF 16949 and ISO 9001-certified facility in Bialystok, Poland, is dedicated to the highest quality manufacturing. Spanning 105,000 square feet, the facility serves as a basic design and engineering center for our Blue Streak^® ignition coils. The facility employs lean manufacturing methods such as the 5S philosophy and features a vertically integrated manufacturing process with multi-spindle winding, injection molding, potting, curing, and welding. At the end of the day, the parts that leave our SMP Poland facility are manufactured for superior performance and durability.

End-of-life testing confirms polarity and continuity to ensure superior function

Semi-automatic bobbin winding speeds up the manufacturing process

All Blue Streak ^® ignition coils are laser etched with the Blue Streak ^® logo

Have a question about this product? Let us know how we can help.

leonardtrinnow.blogspot.com

Source: https://www.standardbrand.com/en/products/blue-streak/categories/blue-streak-ignition-coils

Share this post